contact us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right.


123 Street Avenue, City Town, 99999

(123) 555-6789


You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

Thunder Beast 30CB5 Suppressor


Thunder Beast 30CB5 Suppressor


Thunder Beast 30CB5 Suppressor

545.00 845.00

The model 30CB5 is the new "Compact Brake"-attach version of our 30PSS moderator. It is an extremely compact moderator intended primarily for for subsonic .30 caliber loads. It is also a good choice when the most important priority is adding the absolute minimum length and weight to the rifle while still significantly moderating the muzzle report. Compared to our flagship 30P-1, it is about half the weight (9.6 oz), four inches shorter, and approximately 10 dB louder when using full power .308 ammunition.

The way to interpret the model number for the 30CB5 is: .30caliber, COMPACT BRAKE, 5-inch long (super compact - subsonic/moderator)

The "CB" series suppressors to mount over our new compact brake and provide the same repeatability as our direct thread attach suppressors, like the 30P-1. The 30CB7 features a conical shoulder for rock solid POI repeatability and to make sure it never comes loose.

The 30CB5 is ideal for .300 Whisper or Blackout rifles using subsonic loads. It is rated for full power .30 caliber cartridges up to .300 Winchester Magnum, but is in its element with subsonic or low-power capacity cartridges when only the absolutely smallest sound moderator can be tolerated.

The 30CB5 is constructed of titanium with a fully-welded baffle core. This material and construction provides a great strength to weight ratio. It can take whatever your precision rifle can dish out.



New Compact Brake for .223 up to .30 caliber rifles

Brake-in-suppressor design

Conical shoulder surface

100% titanium construction

360-degree fully-welded baffle core

Helical Baffle Technology

Rock-Solid POI Repeatability



This suppressor is strength-rated for 6.5-284, 7mm Rem Mag, 7mm WSM, .300 Win Mag. Not recommended for use with magnum cartridges with barrel lengths shorter than 22 inches. 7 mm Magnums OK not to exceed 72 grains powder. .30 cal Magnums OK not to exceed 82 grains powder. For questions about a particular rifle/load combination please contact us.


Caliber - .30 caliber, up to .300 Winchester Magnum

Material - Titanium

Length - 5 inches.

Diameter - 1.5 inches.

Weight - 9.6 ounces (varies with thread pattern)

Brake Threads1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5
* Note: The 1/2-28 brake is part number 223CB-BRK:1/2-28 and has a .223 caliber aperture!

Finish - Black CeraKote; (OD Green or FDE available for special order)

Use - Subsonic or low power capacity .30 caliber

Price - $845 (one brake included). 
Extra brakes $125/ea
"CB" External thread protector, $35 
  (not included - sold separately)

Add To Cart