contact us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right.

           

123 Street Avenue, City Town, 99999

(123) 555-6789

email@address.com

 

You can set your address, phone number, email and site description in the settings tab.
Link to read me page with more information.

Thunder Beast 30BAS Suppressor

Suppressors

Thunder Beast 30BAS Suppressor

D464_6455_img.jpg
D464_6455_img.jpg
sale

Thunder Beast 30BAS Suppressor

870.00 1,145.00

The model 30BAS is the seven-inch "Short" version of our brake-attach 30BA suppressor. It is two inches shorter and three ounces lighter than the 30BA. It only gives up approximately 2-3 dB suppression for a noticeably smaller and lighter format. The 30BAS is designed to mount over our muzzle brake. It is particularly suited to applications where the rifle will be shot suppressed and unsuppressed, and a brake is desired when shooting without the suppressor.

The 30BAS shares the same mount as the 30BA, which was developed to meet the requirement that some customers have for a suppressor that mounts over a muzzle device. We haven't found a "quick mount" on the market that meets our accuracy and repeatability requirements, so we developed the BA series to mount over our brake and provide the same repeatability as our direct thread attach suppressors, like the 30P-1. The 30BAS features a conical shoulder for rock solid POI repeatability and to make sure it never comes loose.

The 30BAS is ideal for competition or hunting rifles when the absolute suppression level is not as important as having a smaller, compact suppressor. It was designed around .308 and similar capacity cartridges such as .243 Winchester .260 Remington, 6.5 Creedmoor, 6.5x47 Lapua. It is strength-rated up to .300 Winchester Magnum.

The 30BA brake will accept the 338BA suppressor, so with a .30 caliber brake on your .308 and a .338 brake on your .338 Lapua Magnum, you can use a single 338BA suppressor on both. The 30BAS suppressor will not fit on a 338BA brake.

The 30BAS is constructed of titanium with a fully-welded baffle core. This material and construction provides a great strength to weight ratio. It can take whatever your precision rifle can dish out.

 

SPECIAL FEATURES

Brake-in-suppressor design

Conical shoulder surface

100% titanium construction

360-degree fully-welded baffle core

Helical Baffle Technology

Magnum rated

Rock-Solid POI Repeatability

 

APPLICATION NOTES

This suppressor is strength-rated for 6.5-284, 7mm Rem Mag, 7mm WSM, .300 Win Mag. Not recommended for use with magnum cartridges with barrel lengths shorter than 22 inches. 7 mm Magnums OK not to exceed 72 grains powder. .30 cal Magnums OK not to exceed 82 grains powder. For questions about a particular rifle/load combination please contact us.

Specifications

Caliber - .30 caliber, up to .300 Winchester Magnum

Material - Titanium

Brake Material - Hardened stainless steel

Length - 7 inches.

Diameter - 1.5 inches.

Weight - 12.7 ounces

Brake Threads - 1/2-28*, 5/8-24, 9/16-24, 3/4-20, 3/4-24, 3/4-28, M18x1.0, M18x1.5
* Note: The 1/2-28 30BA brake has a .223 caliber aperture!

Finish - Black CeraKote; (OD Green or FDE available for special order)

UsePrecision/Long-range rifle, bolt or semi-auto

Price - $1145 (one brake included). 
Extra brakes - $135/ea
"BA" External thread protector, $35 
  (not included - sold separately)

Add To Cart